Dynamic Sampling (Data) 110 volts
This unique 110 volt electric dynamic sampling rig was designed for accessing internal sites to removal fume issues the unit is simply plugged into the mains through a 110 volt transformer it is great for quick shallow unconsolidated ground investigations where access through standard doors and fumes could create an issue.
Safety:
Safety guards can be placed on each machine during concrete cutting the rig has a trip out safety power system and operates on 110 volts
Achievable Depth’s
Drilling depth’s for this machine vary depending on Geology but is generally used for overburden sampling of unconsolidated material generally to depth’s of 6m but can with time achieve greater depth’s and have been use to 15m

The rig stats for access:

  • Weight = 0.95 tons
  • Width = 0.740m
  • Height Mast Down = 1.1m
  • Operational Height is adjustable with standard equipment @ 1m = 2.7m  & Short equipment @ 0.5m = 2.3m

Drilling Methods Available
Surface Concrete Removal
A coring attachment can be added to the machine to facilitate concrete coring at 127-150mm diameter

Percussive / Window sampling:
The rig has percussive hammer attached which allows it to drive in linered window sample barrels to recover undisturbed environmental or geotechnical samples

Duplex Casing Systems
A duplex casing system can be used which is driven in consecutively during sampling to case off unstable ground

In situ Testing
The unit can achieve in-situ SPT’s / CPT’s and undisturbed samples

Dynamic Probing
Dynamic probes can be taken to refusal using either using Heavy or super heavy methods

Installations
Once drilling is complete in a size and method agreed the created bore can simply be backfilled or installed with a vast array of ground monitoring instruments as required.